Sideshift brushcutter 78''
- Brand: TAZ
- Product Code: DDBCR78HD
- Availability: 4
-
6,300.00$
- 7,000.00$
Available Options
The TAZ sideshift brushcutter with hammer can be used behind the tractor or offset to the side. It works at all angles from -55° (downwards) to clean ditches up to 90° upwards to cut branches and trees that close the path.
It is the ideal tool for roadside maintenance, for the cottage, the camp, for cutting near or under fences. Requires two pairs of double-action hydraulic outlets. Adjustable shoe and a solid rear roller to avoid eating into the soil on uneven ground.
Works with tall grass, weeds, annual regrowth, small shrubs and branches. As it is a hammer and not a knife, this reduces regrowth by drying the rest of the plant on the ground. The crushed materials will come out on the ground in small pieces which gives a cleaner finish and less collection to do afterwards.
This model requires 2 hydraulic outlets and is designed for tractors from 60 to 80 hp with a category 2 attachment.
- Works behind the tractor or offset
- Works horizontally, vertically and at an angle
- Requires 2 hydraulic outlets
- Recommended for tractors from 60 to 80 hp
- Requires a category 2 attachment
- 28 hammers
| Cutting width | 78 po |
| Maximum angle up | 90° |
| Maximum angle down | 55° |
| Recommended HP | 60-100 HP |
| Weight | 1234 lb |
| Attachment | Cat 2 |